2020 Waratah 600 Series 3 And 4 Roller HTH623C

Information

2020 Waratah 600 Series 3 And 4 Roller HTH623C

Power. Torque. Speed. With its large, high-torque feed motors, delimbing power, and great balance of feed speed, the HTH623C is born to perform with a 25-ton carrier.

Its hydraulic design provides high-flow characteristics combined with low-pressure drop — for increased performance in any application and the toughest conditions.

Photos

Highlights

  • Chehalis, Washington
  • 2020
  • Waratah
  • 600 Series 3 And 4 Roller HTH623C
  • Available
  • Maximum: 79 in (200 cm)

Specifications

  • 2020
  • Waratah
  • 600 Series 3 And 4 Roller
  • HTH623C
  • General
  • Saw type: 3/4 cc | Motor 1: 837 cc / 500 cc | Motor 2: 1048 cc / 630 cc
  • Motor 1 Feed — maximum flow: 17 ft/sec (5.2 m/sec) | Motor 2 Feed — maximum flow: 15.1 ft/sec (4.6 m/sec)
  • Maximum feed roller opening: 34 in (875) | Butt Saw Maximum cutting: 30 in (750 mm) | Bar: 35 in (900mm) | Top Saw Maximum cutting: 18 in (45 cm) | Maximum delimb: 28 in / 35 in (700 mm / 885 mm)
  • and Bar: 26 in (64 cm)
  • Maximum: 79 in (200 cm)
  • Saw type: Waratah 3/4 | Saw limiting: Available with SuperCut 100 | Top knives: 1 floating, 2 moving | Bottom knives: 1 fixed