2020 Waratah 400 Series 4 Roller H415

Information

2020 Waratah 400 Series 4 Roller H415

The Waratah H415 Harvester Head combines large-time-cutting power with excellent delimbing quality. The H415 is hard to beat when it comes to productivity, uptime, and low daily operating costs.

The H415 gives unprecedented tree-processing performance, especially in large timber. New feed-roller-arm geometry ensures rollers grip solidly and reliably carry trunks in all diameter ranges.

The H415 offers a solution for all different kinds of clearfelling with its three options for variable stem types: standard (narrow stem), buttress (wide stem), and top saw (processing and hardwood).

Photos

Highlights

  • Chehalis, Washington
  • 2020
  • Waratah
  • 400 Series 4 Roller H415
  • Available
  • Head open: 1720 mm | Head closed: 1200 mm
  • Without rotator and link: 1510 mm

Specifications

  • 2020
  • Waratah
  • 400 Series 4 Roller
  • H415
  • General
  • Recommended pump capacity: 260–340 l/min
  • Operating: 28 MPa
  • Gross feed force: 400 cc - 630 cc (27 kN) / 500 cc - 780 cc (30 kN) / 1014 cc - 315 cc (25 kN – 42 kN)
  • Chain: 40 m/s | Maximum feed: 2.9–7.0 m/s
  • Maximum cut: 750 mm | Maximum roller opening: 680 mm | Delimbing tip to tip: 460 mm | Maximum opening upper knives: 680 mm | Maximum opening lower knives: 730
  • Without rotator and link: 1510 mm
  • Saw bar: 825 mm / 900 mm
  • Head open: 1720 mm | Head closed: 1200 mm
  • Without rotator and link: 2,932 lb (1330 kg)
  • SuperCut 100 saw unit, automatic chain tensioning: Standard | 4WD with with steel feed rollers | Delimbing knives 4 moving, 2 fixed | Control and Measuring System: For adaptation, contact your Waratah dealer.
  • .404 in