2020 Waratah 200 Series 2 Roller H290

Information

2020 Waratah 200 Series 2 Roller H290

The Waratah H290 is a powerful, high-capacity new-generation harvester head. Built for superior performance in regeneration harvesting, it was specially designed for use with large wheel-and-track-based harvesters.

The H290 features the highly efficient SuperCut 100 saw unit and can fell and process trees up to 760 mm (29.5 in.) in diameter. The SuperCut saw unit minimizes bucking damage, and with its integrated automatic chain lubrication and tensioning system, improves cutting performance while reducing maintenance time. The optional color marking system improves accuracy and ensures low dye consumption.

Four moving delimbing knives and one fixed, adjustable top knife follow the contours of the stem. The geometry of these knives ensures excellent delimbing quality — from large diameters down to small top diameters.

New dual-speed feed motors, with an enormous feed force of up to 41.6 kN (9,352 lbf), handle large-volume harvesting with optimum feed force and speed.

Photos

Highlights

  • Chehalis, Washington
  • 2020
  • Waratah
  • 200 Series 2 Roller H290
  • Available
  • Arms open: 6.5 ft (1970 mm) | Arms closed: 3.9 ft (1187 mm)
  • Without rotator and link: 6.5 ft (1970 mm)

Specifications

  • 2020
  • Waratah
  • 200 Series 2 Roller
  • H290
  • General
  • Recommended pump capacity: 84–100 gpm (320–380 l/min)
  • Operating: 4,061 psi (28 MPa)
  • With 1259/944-cc motors: 8,385/6,317 lbf (37.3/28.1 kN) | With 1404/1050-cc motors: 9,352/7,014 lbf (41.6/31.2 kN)
  • Chain: 131 ft/s (40 m/s) | Maximum feed: 15–20 ft/s (4.5–6.0 m/s)
  • Maximum saw cut: 29.5 (750 mm) | Saw bar: 35.4 in (900 mm) | Maximum feed roller opening: 30.0 in (760 mm) | Delimbing diameter tip to tip: 20.1 in (510 mm) | Maximum opening upper knives: 31.5 in (800 mm) | Maximum opening lower knives: 34.2 in (870 mm)
  • Without rotator and link: 6.5 ft (1970 mm)
  • Arms open: 6.5 ft (1970 mm) | Arms closed: 3.9 ft (1187 mm)
  • Without rotator and link: 4,343 lb (1970 kg)
  • 2WD with hydraulically driven rubber feed rollers | Feed force gross | Delimbing knives: 4 moving and 1 fixed | Control and Measuring System, Adaptation: Timbermatic 10, 30, 300, H09 TimberRite, Motomit IT/PC, Dasa 4 | Control and Measuring System, New Delivery: TimberRite
  • .404 in (10 mm)