2019 T-Mar Industries Log Champ 250 Traction Winch Base

Information

2019 T-Mar Industries Log Champ 250 Traction Winch

Designed and manufactured by T-Mar Industries, the Log Champ 250 Traction Winch is the solution to many of the challenges faced in steep slope logging operations. Using the traction winch allows logging equipment to operate safely when slope restrictions may not allow it. It is not designed to pull equipment, it’s job is to deliver necessary added traction.

Using a traction winch reduces soil disturbance and can save on fuel consumption and stress wear on machinery. With a 2900’ capacity using the Log Champ 250 Traction Winch allows your equipment to access timber in terrain that might otherwise be too steep to harvest.

Photos

Highlights

  • Chehalis, Washington
  • 2019
  • T-Mar Industries
  • Log Champ 250 Traction Winch Base
  • Hydrostatic bi-directional.
  • Available
  • 11’
  • 9’ 8”

Specifications

  • 2019
  • T-Mar Industries
  • Log Champ 250 Traction Winch
  • Base
  • Winch
  • Caterpillar C7.1
  • 275 HP
  • @ 2,200 rpm
  • Air to air after-cooled.
  • Turbocharged
  • Hydrostatic bi-directional.
  • Drive: Constant tension, remotely adjustable.
  • Spring applied Band Emergency and Parking Brake mechanically applies if hydraulic pressure is lost, power is lost, engine stops or emergency stop is pressed.
  • Triple piston pumps comes with valving. | Provides flow for Winch, Travel, Blade and accessories.
  • 2 speed Final Drives operates up to 45º angle.
  • Tension constant within 2% regardless of machine movement.
  • 8” pitch Excavator Rail c/w 24” pads.
  • 36”
  • 11’
  • 9’ 8”
  • 21’
  • 65,000 lbs
  • Anchor Blade: Cupped Blade For Anchoring In Soil Or Behind Stumps Or Rocks. | 1 Fairlead With Large Sheaves Reduce Line Wear And Prevent Reverse Bends. | Radio Control: Travel, Blade, Winch And Accessories 100% Radio Controlled. | Operator Stays In His Cab And Repositions Remotely. | No Tie-In To Machine Required. | Shackle And Go! | Spooling: 100% Passive Spooling System. | Works In Concert With Lagged Drum. | No Gear Or Hydraulic Drive. | No Diamond Jackscrew For Easy Maintenance And Long Life.
  • Emergency shutdown on four points at corners of the machine. | Emergency shutdown on radio. | Machine shuts down if radio contact is lost.