2019 T-Mar Industries Log Champ 250 Traction Winch Base
- Year 2019
- Make T-Mar Industries
- Model Log Champ 250 Traction Winch
2019 T-Mar Industries Log Champ 250 Traction Winch Base
2019 T-Mar Industries Log Champ 250 Traction Winch
Designed and manufactured by T-Mar Industries, the Log Champ 250 Traction Winch is the solution to many of the challenges faced in steep slope logging operations. Using the traction winch allows logging equipment to operate safely when slope restrictions may not allow it. It is not designed to pull equipment, it’s job is to deliver necessary added traction.
Using a traction winch reduces soil disturbance and can save on fuel consumption and stress wear on machinery. With a 2900’ capacity using the Log Champ 250 Traction Winch allows your equipment to access timber in terrain that might otherwise be too steep to harvest.
Engine
Engine Manufacturer
Caterpillar C7.1
Engine Power
275 HP
Rated Engine Speed
@ 2,200 rpm
Cooling System
Air to air after-cooled.
Aspiration
Turbocharged
Drivetrain
Transmission
Hydrostatic bi-directional.
Drive System
Drive: Constant tension, remotely adjustable.
Brakes
Parking Brake
Spring applied Band Emergency and Parking Brake mechanically applies if hydraulic pressure is lost, power is lost, engine stops or emergency stop is pressed.
Hydraulics
Hydraulic Type
Triple piston pumps comes with valving. | Provides flow for Winch, Travel, Blade and accessories.
Operational
Operating Speed
2 speed Final Drives operates up to 45º angle.
Operating Conditions
Tension constant within 2% regardless of machine movement.
Dimensions
Dimensions
8” pitch Excavator Rail c/w 24” pads.
Ground Clearance
36”
Width
11’
Height
9’ 8”
Length
21’
Weights
Weight, In Running Order
65,000 lbs
Capacities
Features
Lagged Drum: with 2900’ capacity (1” swagged rope) or 2300’ capacity (1 1/8" swaged rope). | Line pull limited to provide a 5:1 safety factor.
Lights and Safety
Safety Features
Emergency shutdown on four points at corners of the machine. | Emergency shutdown on radio. | Machine shuts down if radio contact is lost.
Features
Features
Anchor Blade: Cupped Blade For Anchoring In Soil Or Behind Stumps Or Rocks. | 1 Fairlead With Large Sheaves Reduce Line Wear And Prevent Reverse Bends. | Radio Control: Travel, Blade, Winch And Accessories 100% Radio Controlled. | Operator Stays In His Cab And Repositions Remotely. | No Tie-In To Machine Required. | Shackle And Go! | Spooling: 100% Passive Spooling System. | Works In Concert With Lagged Drum. | No Gear Or Hydraulic Drive. | No Diamond Jackscrew For Easy Maintenance And Long Life.