2020 Southstar Equipment Quadstar QS630

Information

2020 Southstar equipment QUADSTAR QS630

4X4 equals increased traction, torque, and delimbing force.

The QUADSTAR harvester processor range is heavy duty and built to last.

The QS630 is built for the toughest of environments, for the largest sized stems, ideal for harvesting or road-side processing.

Features may include:

Wide frame structure

Wide frame design for structuralstrength resulting in a reductionin frame cracking. This also allowsfor improved hose routing withminimal exposed hoses.

Front knife

Extremely tough floating frontknife and sliding mount.

Touch-less encoders

Magnetic touch-less encoders forbetter accuracy and extendedlife duration

BushingsD-Glide bushing material forextended life and durabilityof main pins.Spring link

Innovative spring timing link toallow for variation in multi stemdiameters without loss ofdrive traction.

Delimb arms

Fabricated delimb arms withreplaceable high wear resistantalloy cutting edges.

Delimb tips

Extended delimb tipsand pop angle for easeof picking from the stack.

Drive teeth

Bidirectional drive teethdesign for optimum grip inboth forward and reverse.

Cylinders

High pressure heavy wallcylinders with halite packing kits.

Lock pins

Large diameter with expanderlock pins for decreased wear andincreased life.

Measuring wheel

Extra wide measuring wheelallows operator to accuratelymeasure both single andmulti-stems.

Side stepping drive

Innovative side stepping drivefeature allowing for independentcontrol of two stems. Thisallowing the operator to alignbutts of multiple stems, trimdefects in one stem but not theother, and or process one stemand not the other

Find end sensors

Dual find end sensors to eliminatewastage when multi-stemming.

Feed rollers

Four wide feed rollers forincreased surface area when inmulti-stemming application.

High pressure heavy wallcylinders with halite packing kits.

Drive teeth

Bidirectional drive teethdesign for optimum grip inboth forward and reverse.

Photos

Highlights

  • Chehalis, Washington
  • 2020
  • Southstar Equipment
  • Quadstar QS630
  • Available
  • Maximum with arms open: 2,019 mm (79.50")
  • harvest position including rotator top and link: 3,315 mm (130.5")

Specifications

  • 2020
  • Southstar Equipment
  • Quadstar
  • QS630
  • General
  • Motor cc standard (drive arm): 1,395 cc (1,395 cc) | Motor cc standard (fixed center drive): 800 cc (800 cc)
  • 35 Mpa (5076 Psi)
  • Optimum flow @ pressure: 300-360 l/min @ 15 Mpa (79-95 Gl/min @ 2175 Psi)
  • Feed: 4.4-5.3 m/s (14.4-17.4 ft/s)
  • Maximum delimb opening: 813 mm (32") | Minimum delimb closing diameter: 80 mm (3.1″") | Butt Saw Bar size: 1,016 mm (40") | Butt Saw Chain pitch: 19.05 mm (3/4") | Top Saw Bar size: 762 mm (30") | Top Saw Chain pitch: 19.05 mm (3/4")
  • harvest position including rotator top and link: 3,315 mm (130.5")
  • Maximum with arms open: 2,019 mm (79.50")
  • Maximum drive opening: 1,085 mm (42.5") | Minimum drive closing diameter: 80 mm (3.1")
  • Saw type: Southstar 3/4
  • including rotator top and link: 4,524 kg (9,974 lb)